Freely switching between images, P. 266 – Roland Atelier AT900 User Manual
Page 268
266
Enjoying Music and Video
You can connect various video devices to the ATELIER, and then use the video
function select buttons on the ATELIER’s panel to freely control the image that’s
shown on the external display or television.
1.
Connect a variety of video devices to the ATELIER.
Connecting a video camera
→
Connecting a DVD player
→
Connecting a portable audio/video player
→
2.
Press the video function select buttons to switch the image
shown in the external display or television.
Turning off the Video function
1.
Press video function select buttons to extinguish the
indicators for all of the buttons.
If none of the video function select buttons are lit, the external display or television will
show the ATELIER logo or the screen that the ATELIER itself is showing (p. 243).
Freely Switching Between Images
Button
Function
Page
Camera
Switches to the image from the device connected to
the Camera In connector.
DVD
Switches to the image from the device connected to
the DVD Player In connector.
Ext In
Switches to the image from the device connected to
the Ext In connector.
Video Function Select Buttons
This refers to the following buttons.
[Camera] button
[DVD] button
[Ext In] button
You can also switch the image
by touching the video function
select buttons in the Video
screen or the VIMA TUNES
screen (p. 259).
AT-900_e.book 266 ページ ２００８年９月１６日 火曜日 午前１０時３８分