Roland Atelier AT900 - Manual (Page 182)

180
Recording/Playing Back What You Play
If you wish to discard your recording and re-record from the
beginning, or if you wish to record a new performance, you
must erase the previously-recorded data.
1. Touch on the Main screen.
The Rec/Play screen appears.
fig.07-04-2.eps
2. Touch < > (Utility).
The Utility screen appears.
fig.07-22-2.eps
3. Touch .
The following message, asking you to confirm your
choice, will be displayed.
fig.E-62.eps
If you touch , the performance data will not be
erased, and you will return to the Rec/Play screen.
4. If you touch , the performance data will
be erased.
A name is automatically assigned to a performance song that
you record. However, at some point you may wish to change
the name to something more meaningful.
1. Touch on the Main screen.
The Rec/Play screen appears.
fig.07-04-2.eps
2. Touch < > (Utility).
The Utility screen appears.
fig.07-22-2.eps
Erasing a Performance Song
(Song Clear)
Changing the Name of a
Performance Song (Rename)
You can also use the following method to open the
Song Clear screen.
1. Touch on the Main screen
to display the Quick Guide screen.
2. Press the [Song] button.
The Song Clear screen appears.
AT-900_e.book 180 ページ ２００８年９月１６日 火曜日 午前１０時３８分