No sound is heard, 275 troubleshooting – Roland Atelier AT900 User Manual
Page 277
275
Troubleshooting
Troubleshooting
Appendices
No Sound is Heard
Problem
Check
Solution
Page
No sound is heard
(by the Lower keyboard)
Drums/SFX are selected for the Lower
keyboard, but you are playing a key to
which no drum sound is assigned.
Turn the Drums/SFX off or play keys to
which drums sounds are assigned.
No sound is heard
(by the Upper keyboard)
“Percussion Set 3” has been selected
for the Upper keyboard.
When “Percussion Set 3” is selected,
some keys may have no sound
assigned to them.
For the upper keyboard, select a voice
other than “Percussion Set 3.”
No sound is heard
(by the pedalboard)
Pedal cord is not connected correctly.
Use the pedal cable to connect the
pedal correctly.
No sound is heard (when external
devices are connected)
The power of the connected external
devices is not turned on.
Use the correct procedure to turn on
the power of the connected external
devices.
Lower keyboard cannot be heard
The Lower keyboard will not produce
sound while an Intro or Ending is being
played.
This is not a malfunction.
- - -
There is no sound from the twelve
keys at the right of the lower
keyboard
The V-LINK function is set Mode 2.
When V-LINK setting is Mode 2, the
group of twelve keys starting at the
very right of the lower keyboard are
used for controlling video images.
Therefore, no sounds are played even
when you press these keys.
Turn the V-LINK function off, or select
Mode 1 for the V-LINK function.
No sound is heard
The [Master Volume] slider is set too
low.
Turn the [Master Volume] knob toward
“Max.”
Headphones are connected.
When you connect the headphones,
the sound is heard only through the
headphones.
If you want sound to be output from the
speakers, disconnect the headphones.
The plug is still plugged into the
headphone jack.
Disconnect the plug from the
headphone jack.
The volume is set too low on the Level
[
▲
] [
▼
] buttons.
Press the Level [
▲
][
▼
] buttons to raise
the volume.
The volume is set too low on the
Expression Pedal.
Advance the expression pedal.
You do not have a Voice selected.
Press a voice button to select a voice.
Voices that have their button indicator
lit can be played.
AT-900_e.book 275 ページ ２００８年９月１６日 火曜日 午前１０時３８分