Other problems, 280 troubleshooting – Roland Atelier AT900 User Manual
Page 282
280
Troubleshooting
Other Problems
Problem
Check
Solution
Page
Remote control does not work
Could the Remote function be turned
off?
If the Remote function is turned off,
data from the remote control will not be
received.
Refer to “Turning the Remote function
on/off.”
MIDI messages received at MIDI In
are not sounded
The Computer switch is not set to
“MIDI” position.
Set the Computer switch to “MIDI.”
The Computer switch was set to “MIDI”
after the power was turned on.
Turn off the power, and then turn the
power on once again.
The Touch Screen doesn’t respond
correctly
The positioning of the Touch Screen
may become displaced if some time
has passed since it was last used.
Reposition the Touch screen.
Unable to save created Rhythm to the
User Memory
“Memory Full” appears in the display.
The available memory remaining in the
ATELIER is not sufficient.
First delete some other Rhythm saved to
the User memory, then save the Rhythm
you have created to the User memory
once again.
Can’t read/write USB memory
Could you be using USB memory not
made by Roland?
We cannot guarantee operation if
you’re using USB memory not made by
Roland.
- - -
The External Memory setting is
incorrect.
Change the External Memory setting.
DVD volume is too low (or inaudible)
Is the DVD player connected correctly?
Connect the DVD player correctly.
Could the DVD PLAYER INPUT
[VOLUME] knob be turned to the
minimum position?
The DVD player’s volume is adjusted
with the DVD PLAYER INPUT
[VOLUME] knob; not by the [VOLUME]
knob.
AT-900_e.book 280 ページ ２００８年９月１６日 火曜日 午前１０時３８分