Roland Atelier AT900 - Manual (Page 163)

161
Using the Lower Keyboard Effectively
Using the Lower Keyboard Effectively
When the Solo voice is assigned to the Upper keyboard or the
Lower keyboard, you can specify how the Solo voice will
respond when more than one key is pressed.
1. Touch on the Main screen.
The Sound/Keyboard screen appears.
2. Touch .
The Upper Keyboard screen appears.
3. Touch < > < > to display the Solo Mode.
fig.09-05.eps
4. Touch the Solo Mode setting (the TOP NOTE,
LAST NOTE, or POLYPHONIC indication).
fig.09-06.eps
5. Touch < > < > to change the setting.
6. Touch .
When the Solo voice is being played by the Lower keyboard
(i.e., when the Solo [To Lower] button is ON), you can specify
whether the Lower voice and the Solo voice will sound
together (layered), or will sound separately (split).
1. Touch on the Main screen.
The Sound/Keyboard screen appears.
2. Touch .
The Upper Keyboard screen appears.
3. Touch < > < > to display the Solo To
Lower Mode.
fig.09-07.eps
4. Touch the Solo To Lower Mode setting to
switch between “SPLIT” and “LAYER.”
Each time you touch the Solo To Lower Mode setting, it
will alternate between “SPLIT” and “LAYER.”
5. Touch .
Changing How the Solo Voice Responds
Setting Description
TOP NOTE
The Solo voice will sound the highest
note that is played for the Solo part.
LAST NOTE
The Solo voice will sound the note
that was most recently played for
the Solo part.
POLYPHONIC
The Solo voice will sound all notes
that are played for the Solo part.
Layering the Solo Voice and Lower
Voice
Setting Description
SPLIT The parts will sound separately.
LAYER
The Lower voice and Solo voice will
sound together.
AT-900_e.book 161 ページ ２００８年９月１６日 火曜日 午前１０時３８分