Roland Atelier AT900 - Manual (Page 253)

251
Connecting with External Device
Connecting with External Device
The ATELIER has an Aux/Drums Output jack and Bass Output
jack on the bottom of the instrument.
By using this Aux/Drums Output jack to connect external
speakers or audio set, you can sound the reverb
(reverberation) from the speakers. An external reverb unit can
also be connected and used to apply reverb.
By making connections to the Aux/Drums Output jacks or Bass
Output jack, you can output the drums or bass sounds
separately. This is convenient when you’ve connected the
ATELIER to a mixer so that the overall volume balance can be
adjusted on the mixer.
1. Touch on the Main screen.
The System screen appears.
fig.10-11.eps
2. Touch < > < > to display the Aux Out.
3. Touch the Aux Out setting to switch between
“ON” and “OFF.”
Each time you touch the Aux Out setting, it will alternate
between “ON” and “OFF.”
4. Touch .
This setting remains stored in memory even while power is
turned off.
1. Touch on the Main screen.
The System screen appears.
2. Touch < > < > to display the Aux Out
Mode.
3. Touch the Aux Out Mode setting.
fig.10-11.eps
4. Touch < > < > to change the setting.
5. Touch .
You can change the depth of Reverb for each part (p. 154).
This setting remains stored in memory even while power is
turned off.
Changing the settings when
external speakers are connected
Switching the Aux Out On/OFF
Switching the Aux Out Mode
Setting Effects
AMBIENCE
Play the RSS reverb sound from the external
speakers
The reverb sound applied by the ATELIER will
be output.
TO
EFFECTOR
Connect an external reverb processor and
use it to apply the desired reverb.
The direct sound is output for applying
reverb.
SEPARATE
Use a connected mixer to adjust the volume
balance
Bass, drums, and other sounds will be output
separately.
If the vintage organ type is “Flute,” the bass
sound will not be output from the Bass output
jack. The bass sound will be output from the
Main Output jacks.
ENSEMBLE
The accompaniment and Rhythm will be
heard from external speakers, creating the
sensation that you’re playing with an
orchestra
The sounds you play on the keyboard will be
heard from the ATELIER’s own speakers, and
the accompaniment will be heard from the
speakers that are connected to the Aux/
Drums Output connector.
AT-900_e.book 251 ページ ２００８年９月１６日 火曜日 午前１０時３８分