Roland Atelier AT900 - Manual (Page 135)

133
Using the Performance Functions
Using the Performance Functions
Using the [Brilliance] slider, you can adjust the brightness of the sound.
For a brighter sound, push the slider away from you. For a mellower sound,
pull the slider toward you.
fig.04-06.eps
You can adjust not only the treble range but the bass as well with the
[Brilliance] slider. You can suppress the lower frequencies by moving the
slider downwards.
When you depress the Damper (Sustain) pedal, a decay effect will be added
to the voices.
While you continue depressing the damper pedal, notes will be sustained
even if you release the keys.
fig.04-04.eps
By default the decay effect will be applied to the voices played on the Lower
keyboard.
Adjusting the Brightness of the Sound
Adding Decay to the Sound (Damper Pedal)
NOTE
This setting is not stored in the
Registration.
The explanation at left uses an
illustration of the AT-900.
You can modify the setting so
that decay is only applied to
notes played on the Upper
keyboard (p. 214).
NOTE
Decay can be applied to Pedal
Bass voices played on the
Lower keyboard (when the
Pedal [To Lower] or [Bass Split]
button indicators are lit). In this
case, a decay will not be
applied to the pedal bass
voice.
NOTE
Decay cannot be added to the
Solo voices.
You can connect a pedal
keyboard (PK series; sold
separately) to the AT-900C and
use the pedal keyboard’s hold
pedal to sustain the sound.
AT-900_e.book 133 ページ ２００８年９月１６日 火曜日 午前１０時３８分