Roland Atelier AT900 - Manual (Page 48)

46
Convenient Functions
The ATELIER provides a Global Settings buttons.
If you press the Global Settings [EZ One Finger] button, you’ll be able to produce
chords simply by holding down one or two keys of the lower keyboard.
If you press the Global Settings [EZ Touch] button, you’ll be able to play at a fixed
volume regardless of variations in your keyboard playing strength.
1.
Press the Global Settings [EZ One Finger] button or [EZ
Touch] button.
Pressing these buttons will make the following performance settings.
These settings make it easier for you to perform.
2.
Go ahead and perform!
Settings for Easy Performance
Button Explanations
EZ One Finger
Chord Intelligence function will be on
A chord will be detected when you hold down one or two
keys of the lower keyboard.
Pedal To Lower function will be on
You can sound the Pedal Bass voice by playing the root note
of a chord on the Lower keyboard in the area that is playing
the Lower voice.
EZ Touch function will be on
Initial Touch will be turned off, so that you’ll be able to play
at a fixed volume regardless of variations in your keyboard
touch.
Lower Voice Hold function will be on
You can have Lower voice continue to sound after you
release you fingers from the keys, until the next key is
played.
Chord Hold function will be on
When you use Automatic Accompaniment, and you take
your fingers off the keyboard after fingering a chord in the
lower keyboard, the Automatic Accompaniment will
continue playing until you play the next chord.
EZ Touch
Initial Touch will be turned off
Regardless of the Initial Touch settings of the Registration,
Initial Touch will be turned off. You’ll be able to play at a
fixed volume regardless of variations in your keyboard
touch.
If you press the Global Settings
[EZ One Finger] button to turn it
off (the indicator goes out), the
following functions will return to
their factory-set condition.
• Chord Intelligence function
• Pedal To Lower function
• EZ Touch function
• Lower Voice Hold function
• Chord Hold function
If you press the Global Settings
[EZ Touch] button to turn it off
(the indicator goes out), the
Initial Touch functions will return
to their factory-set condition.
AT-900_e.book 46 ページ ２００８年９月１６日 火曜日 午前１０時３８分