Roland Atelier AT900 - Manual (Page 170)

168
Recording/Playing Back What You Play
During recording, the control track will store the operations as
follows.
• Recording panel operations (Voice selections, Tempo
changes, etc.)
Newly recorded performance data will be added
without erasing the previously recorded data.
• Recording expression pedal operations
This will depend on the function of the expression pedal.
Recording of expression operations will differ depending
on the setting for “Exp. Src (Rec).”
For details refer to “Changing the Function of the
Expression Pedal” (p. 213).
If you wish to erase all the recorded data and record new
performance data, use the editing function “Erase” (erase
performance data) to erase the data (p. 180).
The track buttons will be displayed in the screen when you
record or play back a performance.
1. Touch on the Main screen.
fig.05-08.eps
The Rec/Play screen appears.
The following buttons are referred to as the track buttons.
fig.07-04.eps
All accompaniment data is grouped to the “Accomp” track
button in the Rec/Play screen. In the same manner, the
Rhythm performance data is grouped to “Rhythm.”
If you want to mute only a portion of the Rhythms or
accompaniment, open up the Track Mute screen, and switch
off the Track Mute buttons there (p. 172).
Displaying the Track Buttons
AT-900_e.book 168 ページ ２００８年９月１６日 火曜日 午前１０時３８分