Roland Atelier AT900 - Manual (Page 126)

124
Using the Registration Buttons
Here’s how to delete a Registration set that was saved to a USB memory, User
memory
(p. 233), or floppy disk.
1.
Prepare the Registration that you want to delete.
If you want to delete Registration data from the USB memory, connect the USB
memory to the External Memory connector.
If you want to delete Registration data from the floppy disk, connect the floppy
disk drive to the Ext Drive connector. Into the floppy disk drive, insert a floppy
disk
2.
Touch on the Main screen.
The Registration Load screen appears.
3.
Touch .
The Registration File Edit screen appears.
fig.03-25.eps
Deleting a Set of Registrations
Button Meaning Description
Rename Modify the name
The Rename screen appears. You can
touch the screen and rename the
selected Registration (p. 113).
Up
Change the order
(upward) The selected Registration will be
moved earlier in the order (p. 126).
Down
Change the order
(downward) The selected Registration will be
moved later in the order (p. 126).
Delete Delete the Registration
The selected Registration will be
deleted.
Create Create new folder A new folder will be created (p. 127).
Copy
Copies the
Registration
You can copy Registration from USB
memory to User memory, or copy
Registration from User memory to USB
memory (p. 128).
You can also open the
Registration Load screen by
pressing the [Registration]
button.
AT-900_e.book 124 ページ ２００８年９月１６日 火曜日 午前１０時３８分