Troubleshooting, Power does not turn on, Problems with the screen display – Roland Atelier AT900 User Manual
Page 276
274
Troubleshooting
If the ATELIER does not function in the way you except, first check the following chart. If this does not resolve the problem,
consult your dealer or a nearby Roland Service Station.
Power does not Turn On
Problem
Check
Solution
Page
When you press the [Power On]
switch, the power doesn’t come on
Power cord is not connected correctly.
Connect the power cord correctly.
Problems with the Screen Display
Problem
Check
Solution
Page
Nothing appears on screen
The ATELIER uses a liquid-crystal
screen, so text may not be displayed
when the ambient temperature is
below freezing.
This is not a malfunction.
- - -
It appears as though there are
vertical stripes in the screen
This is due to the nature of a liquid
crystal display, and is not a
malfunction.
This is not a malfunction.
- - -
Can’t view the main screen
The [Video Monitor] button is lit.
If the [Video Monitor] button is lit, the
ATELIER’s display will show the same
image as the device connected to the
ATELIER. Press the [Video Monitor]
button so it’s turned off.
Bouncing Ball is not shown
The Bouncing Ball display is turned off.
Turn the Main Bouncing Ball setting
ON.
Lyrics are not indicated properly in
the display
With some music files, the lyrics cannot
be displayed correctly.
This is not a malfunction.
- - -
In the Notation screen, some lyrics or
notes could extend beyond the edges
of the screen, and not be displayed.
This is not a malfunction.
- - -
A button was pressed while the lyrics
were being shown in the display.
During the display of lyrics, you could
be taken to a different screen if you
press a button.
If you want to have the lyrics be
displayed again, touch
Rec/Play screen.
Notation is not indicated properly in
the display
In the Notation screen, some lyrics or
notes could extend beyond the edges
of the screen, and not be displayed.
This is not a malfunction.
- - -
The Notation display feature is
particularly unsuitable for the display
of difficult, complex musical works that
demand accurate notation.
This is not a malfunction.
If you select a part that does not
contain performance data, notes will
not be displayed in the notation.
Change the part that is displayed.
AT-900_e.book 274 ページ ２００８年９月１６日 火曜日 午前１０時３８分