Roland Atelier AT900 - Manual (Page 124)

122
Using the Registration Buttons
You can simply press the [Load Next] button to successively recall
Registrations in the order in which they were saved on the USB memory or
User memory. This function is called “Load Next.”
When you will be performing live, you can save Registration sets to USB
memory in the order in which you will be performing. Then while you perform,
you can recall the next Registration set easily and smoothly.
There are two [Load Next] buttons. Pressing either one will produce the same
result.
fig.03-01.eps
1.
If you want to load a Registration from USB memory,
connect your USB memory to the External Memory
connector.
If you want to load a Registration from a floppy disk, connect the floppy disk
drive to the Ext Drive connector, and insert the floppy disk containing the
Registration into the floppy disk drive.
2.
Press the [Load Next] button.
The first Registration saved on the USB memory will be recalled into the
ATELIER.
The following screen appears.
fig.03-24.eps
3.
Press one of the Registration [1]–[12] buttons.
The Registration will be loaded (recalled into internal memory).
Recalling the Order that the Registrations are Saved
(Load Next)
Button Description
Undo
Return to the Registration that had been selected before you pressed the
[Load Next] button.
OK
Finalize the Registration. It will not be possible to return to the previous
Registration.
By using the “File Edit” function,
you can modify the order or the
name of the Registrations saved
on USB memory or User
memory, or delete an unwanted
Registration (p. 113, p. 124, p.
126).
You can also assign the
“RIGHT+Load Next” function to
Registration Shift, and use the
foot switch to operate the Next
Load function (p. 137).
AT-900_e.book 122 ページ ２００８年９月１６日 火曜日 午前１０時３８分