RAD Data comm IPmux-11 - Manual (Page 90)

Chapter 4 Configuration Installation and Operation Manual
4-32 Additional Tasks IPmux-11 Ver. 2.00
2. From the File Utilities, select Download/Upload using TFTP.
3. From the Download/Upload using TFTP menu, configure the following:
File name (Name of the file that you intend to transfer)
Command (Operation type)
No operation
Software download
Software upload
Configuration download
Configuration upload
Software download And reset
Server IP (IP address of the TFTP server)
Retry Timeout (Interval between connection retries in seconds).
Total Timeout (TFTP connection timeout in seconds)
View Transfer Status (Current status of the TFTP transfer)
4. Save the changes.
IPmux-11 starts file transfer using TFTP.
Utilities>File Utilities>Download/upload using TFTP
1. File name ... (FILE.IMG)
2. Command > (No operation)
3. Server IP ... (0.0.0.0)
4. Retry timeout(sec)[0 - 1000] ... (1)
5. Total timeout(sec)[0 - 1000] ... (5)
6. View transfer status >
>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 4-35. Download/Upload Using TFTP Menu
Resetting IPmux-11
IPmux-11 supports two types of reset:
• Reset to the default setting
Resetting all parameters
Resetting all parameters, except for management values
• Overall reset of the device.