RAD Data comm IPmux-11 - Manual (Page 139)

Installation and Operation Manual Index
IPmux-11 Ver. 2.00 I-3
environment, C-1
operations, C-1
Statistics
bundles, 6-7
E1, 6-1
Ethernet, 6-5
T1, 6-1
Status
bundles, 4-30
Diagnostics loopback, 4-28, 6-18
Eth physical layer, 4-29
system clock, 4-31
TDM physical layer, 4-29
Superuser, 3-6, 4-8
—T—
T1
collecting statistics, 6-1
configuring the port, 4-15
framing, 4-16
idle code, 4-17
inband loopbacks, 6-19
line bildout, 4-17
line code, 4-16
line interface, 4-16
line length, 4-16
line type, 4-16
OOS code, 4-17
OOS signaling, 4-17
port pinout, A-1
restoration time, 4-17
Rx sensitivity, 4-16
send upon fail, 4-17
signaling mode, 4-17
standards, 1-2
trail mode, 4-16
TDMoIP
frame format, 1-8
operation modes, 1-3, 1-5
QoS, 1-4
ToS, 1-4
versions, 1-9
TDMoMPLS, 1-3
frame format, 1-10
Technical support, 6-25
Telnet, 4-9
Terminal
choosing options, 3-7
ending session, 3-8
rate, 4-10
TFTP, 4-31, B-3
Time, 4-27
Timeslots
assigning to bundles, 4-20
Timing
adaptive, 1-8
configuring, 4-13, 4-16
external, 1-7, 1-8
loopback, 1-7
modes, 1-6
Trace route
running, 6-21
Trail-extended mode, 1-15
Traps
alarm, 4-5
authentication failure, 4-5
link up/down, 4-5
masking, 6-15
—U—
UDP, 1-3, 1-8, 1-10, C-1
Uploading application
via TFTP, 4-31, B-3
User, 3-7, 4-8
User name, 3-6
defining, 4-8
—V—
VLAN, 1-10, 1-16
configuring table, 4-25
default ID, 4-25
default priority, 4-25
—X—
XMODEM, B-2