RAD Data comm IPmux-11 - Manual (Page 86)

Chapter 4 Configuration Installation and Operation Manual
4-28 Additional Tasks IPmux-11 Ver. 2.00
2. From the Date/Time menu, select Set time, and enter the current time in the
hh:mm:ss format.
3. Select Set date, and enter the current date in the yyyy:mm:dd format.
Configuration>System>Date/time
1. Set time ... (09:12:06)
2. Set date ... (2004-01-18)
>
Please select item <1 to 2>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 4-28. Date/Time Menu
Displaying the IPmux-11 Status
The IPmux-11 software allows displaying information on the physical layer and
bundle connections. This section describes only status information of the IPmux-11
device. For description of IPmux-11 alarms, refer to Chapter 6 .
The status information is available via the Status menu.
To access the Status menu:
1. From the Main menu, select Monitoring.
The Monitoring menu appears.
2. From the Monitoring menu, select Status.
The Status menu appears (see Figure 4-29 ).
Monitoring>Status
1. Diagnostics loopback >
2. TDM Physical layer >
3. ETH Physical layer >
4. Connection >
5. System clock >
>
Please select item <1 to 4>
ESC-prev.menu; !-main menu; &-exit 1 Mngr/s
Figure 4-29. Status Menu
Displaying the Diagnostics Loopback Information
You can view the status of the diagnostics loopback.
To display the diagnostics loopback information:
• From the Status menu, select Diagnostics loopback.