RAD Data comm IPmux-11 - Manual (Page 49)

Installation and Operation Manual Chapter 3 Operation
IPmux-11 Ver. 2.00 Default Settings 3-3
3.3 Default Settings
The following table lists the default settings of the IPmux-11 configuration
parameters.
Table 3-2. Default Settings
Parameter Default Value
System
IP address Empty
IP mask Empty
Default gateway 0.0.0.0
DHCP status Enable
Authentication failure trap Disable
Trap SNMP_trap
Read public
Write private
Manager IP address 0.0.0.0
Manager location Empty
Link up/down trap Empty
Alarm trap Empty
VLAN tagging Empty
VLAN ID Empty
VLAN priority Empty
User name su
Permission Full control
Access All
Telnet access Enable
Web access Enable
Alarm ID –
Trap status Active
Baud rate (bps) 115200
Data bits 8
Parity None
Stop bits 1
Flow control None
Master clock source Port1