Proxim ORiNOCO AP-700 - Manual (Page 62)

Performing Advanced Configuration AP-700 User Guide
Management
62
6. Set the value of the Bootfile Name parameter to the Configuration filename. For example: AP-Config
7. If using Syslog, set the Log server IP address (option 7, Log Servers).
8. Reboot the AP. When the AP reboots it receives the new configuration information and must reboot one additional time. If a Syslog server
was configured, the following messages can be observed on the Syslog server:
•
AutoConfig for Dynamic IP
• TFTP server address and configuration filename
• AutoConfig Successful