Dhcp relay server table link integrity parameters, Link integrity parameters, Dhcp relay server table – Proxim ORiNOCO AP-700 User Manual
Page 161: Link integrity ip target table
Using the Command Line Interface (CLI)
AP-700 User Guide
Parameter Tables
161
DHCP Relay Server Table
The DHCP Relay Server Table contains the commands to set the table entries. The AP supports the configuration of a maximum of 10 server
settings in the DHCP Relay Agents server table.
Link Integrity Parameters
Link Integrity IP Target Table
Name
Type
Values
Access CLI Parameter
DHCP Relay Server Table
Table
N/A
R
dhcprelaytbl
DHCP Relay Server Table Entry
Index
Integer32
1...10
R
dhcprlyindex
DHCP Relay Server Table Entry
IP Address
IpAddress
User Defined
RW
dhcprlyipaddr
DHCP Relay Server Table Entry
Comment
DisplayString
User Defined
RW
dhcprlycmt
DHCP Relay Server Table Entry
Status
Integer
Enable (1)
Disable (2)
Delete (3)
Create (4)
RW
dhcprlystatus
Name
Type
Values
Access
CLI Parameter
Link Integrity
Group
N/A
R
linkint
Link Integrity Status
Integer
enable
disable (default)
RW
linkintstatus
Link Integrity Poll
Interval
Integer
500 - 15000 ms
(in increments of 500ms)
500 ms (default)
RW
linkintpollint
Link Integrity Poll
Retransmissions
Integer
0 - 255
5 (default)
RW
linkintpollretx
Name
Type
Values
Access CLI Parameter
Link Integrity IP Target
Table
Table
N/A
R
linkinttbl
Table Index
Integer
1-5
N/A
index
Target IP Address
IpAddress
User Defined
RW
ipaddr
Comment (optional)
DisplayString
User Defined (up to 254
characters)
RW
cmt
Status (optional)
Integer
enable
disable (default)
delete
RW
status