Proxim ORiNOCO AP-700 - Manual (Page 25)

Getting Started AP-700 User Guide
Hardware Installation
25
2. When connecting the first REA cable to a radio, attach the cable to the outer connector in the compartment (connector 1).
NOTE
There are two antenna connectors in the AP-700 labeled 1 through 2. When connecting one REA to the radio, use connector 1. The
second REA for the radio should be connected to connector 2.
Figure 2-7 AP-700 Antenna Connectors
3. If installing a second REA on the radio, connect the cable to connector 2.
4. Close the External Antenna Access compartment.
Installing the AP in a Plenum
In an office building, plenum is the space between the structural ceiling and the tile ceiling that is provided to help air circulate. Many
companies also use the plenum to house communication equipment and cables. However, these products and cables must comply with
certain safety requirements, such as Underwriter Labs (UL) Standard 2043: “Standard for Fire Test for Heat and Visible Smoke Release for
Discrete Products and Their Accessories Installed in Air-Handling Spaces”.
The AP-700 has been certified under UL Standard 2043 and can be installed in the plenum.
Connector 2
Connector 1
802.11a/b/g radio
connectors