Proxim ORiNOCO AP-700 - Manual (Page 114)

Performing Commands AP-700 User Guide
Update AP
114
Update AP
Update AP via TFTP
Use the Update AP via TFTP tab to download Configuration, AP Image, Bootloader files, and Certificate and Private Key files to the AP. A
TFTP server must be running and configured to point to the directory containing the file.
Figure 6-2 Update AP via TFTP Command Screen
If you do not have a TFTP server installed on your system, install the TFTP server from the ORiNOCO CD. You can either install the TFTP
server from the CD Wizard or run OEM-TFTP-Server.exe found in the CD’s Xtras/SolarWinds sub-directory.
The Update AP via TFTP tab shows version information and allows you to enter TFTP information as described below.
•
Server IP Address: Enter the TFTP server IP Address.
–
Double-click the TFTP server icon on your desktop and locate the IP address assigned to the TFTP server. Note: This is the IP
address that will be used to point the Access Point to the AP Image file.
• File Name: Enter the name of the file to be downloaded (including the file extension).
–
Copy the updated AP Image file to the TFTP server’s root folder. The default AP Image is located at
C:/Program Files/ORiNOCO/AP/.
• File Type: Select the proper file type. Choices include:
–
Config for configuration information, such as System Name, Contact Name, and so on.
– Image for the AP Image (executable program).
– Upgrade BspBl for the Bootloader software.
– SSL Certificate: the digital certificate for authentication in SSL communications.
– SSL Private Key: the private key for encryption in SSL communications.
– Upgrade BspBl for the Bootloader software.
– SSH Public Key: the public key in SSH communications. Refer to Secure Shell (SSH) for more information.
– SSH Private Key: the private key in SSH communications. Refer to Secure Shell (SSH) for more information.
– CLI Batch File: a CLI Batch file that contains CLI commands to configure the AP. This file will be executed by the AP immediately
after being uploaded. Refer to
CLI Batch File for more information.
• File Operation: Select either Update AP or Update AP & Reboot. You should reboot the AP after downloading files.