Network functions, Hardware specifications, Physical specifications – Proxim ORiNOCO AP-700 User Manual
Page 189: Ethernet interface, Serial port interface, Active ethernet interface, Http interface, Electrical specifications, Environmental specifications
Specifications
AP-700 User Guide
Hardware Specifications
189
Network Functions
Note 1: Includes Fallback to Primary RADIUS Server, RADIUS Session Timeout, RADIUS Multiple MAC Address Formats, RADIUS DNS
Host Name Support, RADIUS Start/Stop Accounting.
Hardware Specifications
Physical Specifications
Dimensions (H x W x L) = 6.5 x 18.5 x 26 cm (2.5 x 7.25 x 10.25 in.)
Weight = 1.75 Kg (3.5 lb.)
Electrical Specifications
Voltage = 100 to 240 VAC (50-60 Hz)
Current = 0.2 amp
Power Consumption = <9 Watts (power supply)
Environmental Specifications
Operating = 0°C to 55°C (32°F to 131°F) @ 5 to 95% relative humidity, non-condensing at 5°C and 55°C
Storage = -20°C to 85°C (-4°F to 185°F) @ 5 to 95% relative humidity, non-condensing at 5°C and 85°C
Ethernet Interface
10/100 Base-TX, RJ-45 female socket
Serial Port Interface
Standard RS-232C interface with DB-9, female connector
Active Ethernet Interface
Category 5, foiled, twisted pair cables must be used to ensure compliance with FCC Part 15, subpart B,
Class B requirements
Standard 802.3af pin assignments
HTTP Interface
•
Microsoft Internet Explorer 6 with Service Pack 1 or later
•
Netscape 7.1 or later
Feature
Supported by AP-700
DHCP Client
yes
DHCP Server
yes
DHCP Relay Agent and IP Lease
Renewal
yes
Inter Access Point Protocol (IAPP)
yes
Link Integrity
yes
System Logging (Syslog)
yes
RADIUS Accounting Support
1
yes
DNS Client
yes
TCP/IP Protocol Support
yes
Virtual LAN Support
You can configure up to 16
SSIDs and VLANs , with
specific Security and RADIUS
profiles. For more information,
refer to the Advanced
Configuration chapter.