Proxim ORiNOCO AP-700 - Manual (Page 34)

AP-700 User Guide
34
3
Viewing Status Information
The first screen displayed after Logging into the HTTP Interface is the System Status screen. You can always return to this screen by clicking
the Status button.
Figure 3-1 System Status Screen
Each section of the System Status screen provides the following information:
•
System Status: This area provides system level information, including the unit’s IP address and contact information. See System for
information on these settings.
• System Alarms: System traps (if any) appear in this area. Each trap identifies a specific severity level: Critical, Major, Minor, and
Informational. See
Alarms for a list of possible alarms.
From this screen, you can also access the AP’s monitoring and configuration options by clicking on the buttons on the left of the screen.