Reset – Proxim ORiNOCO AP-700 User Manual
Page 120
Performing Commands
AP-700 User Guide
Reset
120
Reset
Use the Reset tab to restore the AP to factory default conditions. The AP may also be reset from the RESET button located on the side of the
unit. Since this will reset the Access Point’s current IP address, a new IP address must be assigned. Refer to
for more
information.
CAUTION
!
Resetting the AP to its factory default configuration will permanently overwrite all changes that have made to the unit. The AP will
reboot automatically after this command has been issued.
Figure 6-12 Reset to Factory Defaults Command Screen