Proxim ORiNOCO AP-700 User Manual
Page 163
Using the Command Line Interface (CLI)
AP-700 User Guide
Parameter Tables
163
802.11a Only Parameters
Note 1: Super Mode must be enabled first on the wireless interface before Turbo Mode can be enabled.
Name
Type
Values
Access CLI Parameter
Operating Frequency Channel
Integer
Varies by regulatory
domain and country. See
RW
channel
Supported Data Rates
Octet String
See
Transmit Rate
,
below
R
suppdatarates
Transmit Rate
Integer32
0 - Auto Fallback
(default)
6 Mbits/sec
9 Mbits/sec
12 Mbits/sec
18 Mbits/sec
24 Mbits/sec
36 Mbits/sec
48 Mbits/sec
54 Mbits/sec
RW
txrate
Physical Layer Type
Integer
ofdm (orthogonal
frequency division
multiplexing) for 802.11a
R
phytype
SuperMode
Integer
enable
disable (default)
RW
supermode
TurboMode
Integer
enable
disable (default)
RW
turbomode