Filtering parameters, Ethernet protocol filtering parameters, Static mac address filter table – Proxim ORiNOCO AP-700 User Manual
Page 171: Ethernet filtering table
Using the Command Line Interface (CLI)
AP-700 User Guide
Parameter Tables
171
Filtering Parameters
Ethernet Protocol Filtering Parameters
Ethernet Filtering Table
Identify the different filters by using the table index.
NOTE
The filter Operation Type (passthru or block) applies only to the protocol filters that are enabled in this table.
Static MAC Address Filter Table
Name
Type
Values
Access
CLI Parameter
Ethernet Filtering
Group
N/A
R
etherflt
Filtering Interface
Bitmask
Interface Bitmask
0 or 2 - no interfaces
(disable)
1 or 3 - Ethernet
4 or 6 - Wireless
5 or 7 - all interfaces
(default is 7)
RW
etherfltifbitmask
Operation Type
passthru
block
RW
etherfltoptype
Name
Type
Values
Access
CLI Parameter
Ethernet Filtering Table
Table
N/A
R
etherflttbl
Table Index
N/A
N/A
R
index
Protocol Number
Octet String
N/A
RW
protonumber
Protocol Name (optional) DisplayString
RW
protoname
Status (optional)
Integer
enable (1)
disable (2)
delete (3)
RW
status
Name
Type
Values
Access
CLI Parameter
Static MAC Address
Filter Table
Table
N/A
R
staticmactbl
Table Index
N/A
N/A
R
index
Static MAC Address on
Wired Network
PhysAddress
User Defined
RW
wiredmacaddr
Static MAC Address
Mask on Wired Network
PhysAddress
User Defined
RW
wiredmask
Static MAC Address on
Wireless Network
PhysAddress
User Defined
RW
wirelessmacaddr
Static MAC Address
Mask on Wireless
Network
PhysAddress
User Defined
RW
wirelessmask
Comment (optional)
DisplayString
max 255 characters
RW
cmt
Status (optional)
Integer
enable (default)
disable
delete
RW
status