Set interface management services – Proxim ORiNOCO AP-700 User Manual
Page 151
Using the Command Line Interface (CLI)
AP-700 User Guide
Other Network Settings
151
Set Interface Management Services
Edit Management IP Access Table
[Device-Name]>set mgmtipaccesstbl
Configure Management Ports
[Device-Name]>set snmpifbitmask <(see below)>
[Device-Name]>set httpifbitmask <(see below)>
[Device-Name]>set telifbitmask <(see below)>
Choose from the following values:
Set Communication Ports
[Device-Name]>set httpport
[Device-Name]>set telport
Configure Secure Socket Layer (HTTPS)
Enabling SSL and configuring a passphrase allows encrypted Secure Socket Layer communications to the AP through the HTTPS interface.
[Device-Name]>set sslstatus
The user must change the SSL passphrase when uploading a new certificate/private key pair, which will have a corresponding passphrase.
[Device-Name]>set sslpassphrase
[Device-Name]>show http
To view all HTTP configuration information including SSL.
HTTP Group Parameters
=====================
httpifbitmask : 15
httppasswd : ********
httpport : 80
httphelplink : file:///C:/Program Files/ORiNOCO/AP700/HTML/home.htm
httpsetupwiz : disable
sslstatus : enable
sslpassphrase : ********
Set Telnet Session Timeouts
[Device-Name]>set tellogintout
Configure Serial Port Interface
NOTE
To avoid unexpected performance issues, leave Flow Control at the default setting (none) unless you are sure what this setting
should be.
100 Mbits/sec - full duplex
100fullduplex
Auto Speed - half duplex
autohalfduplex
Auto Speed - auto duplex
autoautoduplex (default)
Interface bitmask
Description
0 or 2 = disable (all interfaces)
All management channels disabled
1 or 3 = Ethernet only
Ethernet only enabled
4 or 6 = Wireless only
Wireless only enabled
5 or 7 = all interfaces
All management channels enabled