Proxim ORiNOCO AP-700 User Manual
Page 52
Performing Advanced Configuration
AP-700 User Guide
Interfaces
52
Figure 4-14 Adding WDS Links
6. Select whether to use encryption in the WDS by checking the Enable WDS Security Mode checkbox.
7. If you enabled WDS Security Mode, enter the Encryption Key 0 used for encryption between the WDS links.
8. Enter the MAC Address that you wrote down in Step 2 in one of the Partner MAC Address field of the Wireless Distribution Setup
window.
9. Set the Status of the device to Enable.
10. Click OK
.
11. Reboot the AP.