Siemens EMOTION 16-Jun - Manual (Page 85)

Workflow Information
85
On the Manual Entries tab card you can configure the
System Entries and Manual Entries, that should be
displayed in the e-Logbook.
System Entries are automatically filled out by the sys-
tem and displayed in the e-Logbook as read-only if
they are configured.
Default settings are:
• Date of Examination
• Patient Name
• Patient ID
• Date of birth
• Scan Protocol Name
• Total mAs
The Continuous Number field is an incremental num-
ber to mark each recorded study within a defined time
range. In addition the Start No. can be set to ensure for
example an ongoing numbering after a software
update.