Siemens EMOTION 16-Jun - Manual (Page 457)

Specials
457
Example
3.5 second scan done.
Then at least four images are saved depending on con-
figuration:
• Conf: 1ima/s
– Central image - after 1st second
– Central image - after 2nd second
– Central image - after 3rd second
– Central image - after 3,5 seconds (last)
– All together - 4 images
• Conf: 1ima/s + last 3 CARE View images
– Central image - after 1st second
– Central image - after 2nd second
– Central image - after 3rd second
– Head/Central/Feet images - after 3,5 seconds
– All together - 6 images
• Conf: 1*3ima/s
– Head/Central/Feet images - after 1st second
– Head/Central/Feet images - after 2nd second
– Head/Central/Feet images - after 3rd second
– Head/Central/Feet images - after 3,5 seconds
– All together - 12 images
Auto load
You have the possibility to turn the CARE Vision auto
"on". The system will then automatically load the CARE
Vision Mode and display the axial images so that you
can plan on which table position you want to perform
your interventional procedure by using the "Move
table position to displayed image position" function. If
you prefer to reconstruct the images first you can
switch this function off.