Siemens EMOTION 16-Jun - Manual (Page 374)

374
Vascular
Hints
• CARE Bolus may be used to optimize the bolus tim-
ing.
• Set the ROI for monitoring scan in the aortic arch
with triggering threshold of 120 HU, or use manual
triggering.
• High quality 2D & 3D postprocessing can be achieved
using a thin slice thickness and 50% overlapping
increments.
• Thick MPRs and ThinMIPs can be created very quickly
on the 3D Task Card by just clicking on the appropri-
ate icons. The thickness of these reconstructed
images can be defined by clicking on the icons with
the right mouse to open the entry field.
Contrast medium IV injection
Start delay
15 sec.
Flow rate 4 ml/sec.
Total amount 90 ml