IBM INFOPRINT 6500 - Manual (Page 361)

Miscellaneous Commands
361
close tcp TCPindexnumber
Example: close tcp 3
Close the a TCP/IP connection between a TCP/IP host and the
Ethernet Interface. The TCPindexnumber can be retrieved
from “debug tcp” output.
disable ioport|destination|printer mgr
Example: disable prn
Disable an I/O port so that queued jobs are not printed, or
disable a destination so jobs cannot be queued to it.
Example: enable printermgr
Enables the printer debug port to allow remote printer
management software to function.
enable ioport|destination
Example: enable prn
Enable an I/O port so that queued jobs are printed, or
enable a destination so jobs can be queued to it.
load [default]
Load the settings stored in flash memory and use them as the
current or working settings. If default is specified as well,
factory settings will be loaded.
lpstat [ioport] [jobID]
Example: lpstat prn
Display active and queued jobs and I/O port status for a given
ioport or jobID. Specifying one of these parameters will
shorten the output and focus on the particular I/O port or print
job specified.
keycode
Determine the hexadecimal value for a key to be used as the
escape character with the Ethernet Interface built-in telnet
command.