IBM INFOPRINT 6500 - Manual (Page 354)

Chapter 16 Complete Command List
354
set sysinfo smtp [port ]
Example: set sysinfo smtp 192.75.11.5 port 25
Define the SMTP (Simple Mail Transfer Protocol) server IP
address or domain name and port number where the mail is
stored on your network.
Default: Unconfigured, 25
set sysinfo syslog
Example: set sysinfo syslog 192.75.11.30
Set the IP address of the host running the SYSLOG daemon.
Ethernet Interface debugging or print job and printer logging
information can be sent to that IP address.
set sysinfo dns
Example: set sysinfo dns 192.75.11.2
Set your DNS server IP address so the Ethernet Interface can
resolve host names when used with its built-in Telnet and
ping clients.
set sysinfo descramblekey
Example: set sysinfo descramblekey 1234
Set the key value used for descrambling print jobs that have
passed through Printronix npscramble utility on a TCP/IP host.
This key is a four-digit hexadecimal value obtained from the
host software, npscramble. Within the npscramble source
code, there is a variable called SR_KEY which contains the
default key value. This can be changed to any four-digit value
you would like.
set sysinfo module [[-]novell] [[-]netbios]
Example: set sysinfo module -novell
Enable and disable certain network protocol stacks within the
Ethernet Interface. Sometimes it helps to disable any protocols
you are not using on your network.
NOTE: [ - ] novell option is available on Adapter, Wireless only.
set user add|del
Example: set user add eng
Add or remove a user on the Ethernet Interface defined by
>.