13 iseries configuration, snmp, Configuration instructions, Iseries configuration, snmp – IBM INFOPRINT 6500 User Manual

Page 309

Text mode
Original mode

309

ISeries Configuration,

SNMP

Configuring for a *LAN 3812 SNMP Device Description

Support for SNMP is available in the base code for iSeries
OS V4RS and above. *LAN 3812 SNMP device descriptions are
similar to *LAN 3812 PJL device descriptions, and they fully support
the page range function.

Configuration Instructions

To configure a 6500-v, for SNMP system device driver program,
use the CRTDEVPRT command. The following parameters should
be specified:

Device Class (DEVCLS)

This needs to be set to *LAN.

Device Type (TYPE)

This needs to be set to 3812.

Device Model (MODEL)

This needs to be set to 1.

LAN Attachment (LANATTACH)

This needs to be set to *IP.