IBM INFOPRINT 6500 - Manual (Page 210)

Chapter 7 Novell Host Configuration (10/100Base-T)
210
3. Direct your Web browser to URL:
http://EthernetInterfaceIPaddress/
networkConf.html
(e.g., http://192.75.11.9/networkConf.html).
NOTE: If prompted for a “User ID” and password first, type in root
for the ID and press ENTER at the password prompt (since
there is no password by default).
4. Look under the “Novell” section and find a row in the
RPRINTER category.
5. Click “Enabled” and enter the name used with the
PSERVER.NLM into the “Print Server Name” field.
NOTE: If it is an NDS pserver, enter only the PSERVER name and
not the context (e.g., sales_ps).
6. Enter the printer number of the printer you would like serviced
into the “Printer Number” field, and then select the destination
on the Ethernet Interface you would like to use for output.
7. Repeat steps 4 through 6 for each additional printer you would
like to have serviced.
8. Click the SUBMIT button when done and physically repower
the printer to make the new settings take effect.
Manual (Telnet) Method
1. Load a PSERVER on your Netware 3. x, Netware 4.x, or
Netware 5. x file server (i.e., issue a load pserver
pservername command on the file server).
NOTE: If it is an NDS PSERVER on a Netware 4. x/5.x file server,
you must specify the pserver name and context for
pservername . For example:
load pserver .sales_ps.sales.IBM
2. Telnet to the print server:
telnet ipaddress
NOTE: If prompted for a “User ID” and password first, type root for
the ID and press ENTER at the password prompt (since
there is no password by default).