IBM INFOPRINT 6500 - Manual (Page 162)

Chapter 5 SCO Setup
162
Local Filtering
1. Enter smitty mkvirprt.
2. Add a Remote Print Queue.
3. Set the type of Remote Printing to Local Filtering...
4. Set the Printer Manufacturer to IBM.
5. Set the Printer Type to IBM4202.
IMPORTANT You must change the printer emulation to Proprinter.
6. Enter the following Remote Print Queue with Local Filtering
settings:
Troubleshooting
This installation procedure assumes that the Ethernet adapter is
configured with the correct IP address, subnet mask, and gateway
(if required). In addition you can also ping and telnet to the Ethernet
adapter.
Name of queue any_name, user selectable
Host Name of Remote Server name in /etc/hosts file or the
Ethernet IP address
Name of Queue on Remote
Server d1prn
Type of Print Spooler BSD (Press the list button and
choose BSD)
Leave Pass-Through Flag Yes