Netware version 4.x and 5.x pserver setup, Netware version 4. x and 5.x pserver setup – IBM INFOPRINT 6500 User Manual
Page 182
Chapter 6
Novell Host Configuration
182
NetWare Version 4.
x and 5.x PSERVER Setup
Ethernet Interface destinations are case sensitive and will not be
recognized if they are typed incorrectly. By default, they are all
lower case. If you are setting up a NetWare 4 environment, the
destination must be renamed to uppercase to match the
PCONSOLE entry.
The Ethernet Interface can be used in a NetWare 4 or 5
environment with either of the following options:
•
Set the Ethernet Interface up as a PSERVER, replacing a
dedicated printer.
•
Set the Ethernet Interface up as an RPRINTER, interacting with
an existing PSERVER (see page 185).
NOTE: Following a PSERVER setup, bindery emulation is
required.
To configure the Ethernet Interface as a PSERVER in a NetWare 4
environment:
1.
Log in to the Novell as supervisor.
2.
Enter PCONSOLE.
3.
Press F4.
4.
Select PRINT QUEUES.
5.
Press INSERT to add a queue.
6.
Type in a new queue name and press ENTER.
7.
Press ESCAPE.
8.
Select PRINT SERVERS.
9.
Press INSERT to add the new print server.