User supplied values, Using telnet commands for tn5250, Command list – IBM INFOPRINT 6500 User Manual
Page 303: Store commands
User Supplied Values
303
User Supplied Values
iSeries: For this session, use the IP value from (step 4 above).
Device description: This is the name of the virtual device.
Auto connect:
•
If true (enabled) then queue and device automatically attach.
•
If not true (disabled) the command “tn dest dxprn start/stop”
allows individual sessions to start or stop.
NOTE: Leave other values at their default descriptions.
Example of telnet session commands:
store tn dest d8prn iSeries 192.168.168.34
store tn dest d8prn devicedesc palletform
store tn dest d8prn autoconnect
reset
This example creates a device/queue named “palletform” on the
iSeries with IP 192.168.168.34. The Ethernet adapter initiates the
connection each time it is reset or the printer power is cycled.
Using Telnet Commands for TN5250
Command List
The following commands for TN5250 are available via a Telnet
session with the Ethernet.
Store Commands
store tn dest
store tn dest
store tn dest
store tn dest
store tn dest
store tn dest
store tn dest