IBM INFOPRINT 6500 - Manual (Page 237)

Setting Up Printing For ASCII Files
237
4. If the printer cannot be pinged, proceed to “iSeries ASCII
Troubleshooting” on page 237.
5. Use one of the following methods to send a spooled file to the
printer:
• Enter the LPR command on the iSeries command line with
the appropriate parameters. See “To Use LPR Manually”
on page 229.
• Enter STRRMTWTR name on the iSeries command line,
where name is the name of the iSeries remote output
queue (not the printer Internet queue, as described on
“To Create An Automatic Remote Output Queue” on page
231).
• Use the WRKOUTQ command to send jobs.
iSeries ASCII Troubleshooting
During power up, the printer performs an interface hardware test.
The presence of the ETHERNET PARAMS menu selection at the
printer control panel indicates that the Ethernet Interface hardware
is functioning properly. See the
User's Manual for configuration
menu information.
If you have trouble pinging the printer:
1. Verify the configuration of the iSeries, including the printer and
any intervening devices such as routers and bridges.
2. Verify that the iSeries line description is varied on and the
printer is turned on and displays an ONLINE status.
3. Verify that the iSeries TCP/IP is active.
iSeries ASCII Troubleshooting