Getting started, List commands – IBM INFOPRINT 6500 User Manual
Page 304
Chapter 12
Using Telnet Commands for TN5250
304
store tn dest
See page 329 for store command descriptions.
List Commands
list tn
list stored tn
list default tn
See page 356 for list command descriptions.
TN5250/3270 Auto Connect Command
tn dest
See page 363 for a detailed description.
Getting Started
Set the following items when first configuring the Ethernet for use
with an iSeries running TN5250:
•
The IP address of the iSeries you are planning to use.
Example: store tn dest d1prn as400 192.75.11.1
•
The device description or queue name you want built on the
iSeries for the printer. This must be unique to the printer.
Example: store tn dest d1prn devicedesc MOCHA3812
•
Enable the printer to automatically connect to the iSeries when
it is first powered up or automatically reconnect if the original
connection is lost.
Example: store tn dest d1prn autoconnect
In most circumstances, all other settings can be left as default.
The printer should be reset (powered off and on again) for the
settings to take effect.
If you do not wish the printer to connect automatically when
powered up then leave the autoconnect disabled and control
the connection manually with the following command: