IBM INFOPRINT 6500 - Manual (Page 185)

NetWare Version 4.x and 5.x RPRINTER Setup
185
4. Enter the password. If this password is not yet set, press
ENTER at the password prompt. Otherwise, enter the
password that is already stored in the unit:
password
You are now logged in to the unit as a root user and can access
any npsh command on the unit.
NOTE: Because npsh.exe makes use of broadcasts, you may
have problems communicating across a router.
NetWare Version 4. x and 5.x RPRINTER Setup
The Ethernet Interface can be configured to service both
RPRINTER, NDS mode, and PSERVER, bindery mode.
Use the following procedure to set up an RPRINTER form of
attachment on a 4.
x or 5.x server:
1. The Ethernet Interface requires a bindery server login on the 4. x
or 5 .x as the first step to servicing RPRINTER. This bindery
login is necessary for registering the Ethernet Interface Pserver
name; no bindery queues or printers are set up. Using
PCONSOLE, bindery mode, create a bindery printer server
object whose name matches that of the Ethernet Interface at
the root context of the 4.
x or 5.x box (e.g., M_03092B). After
creating the bindery PrintServer on the 4. x or 5.x server, reboot
the Ethernet Interface and print out the E-NET Test Page to
make sure there is a successful server login.
2. Using either PCONSOLE in NDS mode or NWADMIN:
a. Create an NDS queue (any name you want), or simply use
an existing one
b. Create a print server to use (any valid name, or choose one
already in existence)
c. Create a printer object to use with the print server object
you chose or created, and attach it to the chosen queue