IBM INFOPRINT 6500 - Manual (Page 244)

Chapter 9 Configuring On iSeries As An IPDS Printer
244
Configuring An Interface For Ethernet
ADDTCPIFC is used to add a TCP/IP interface to iSeries. This step
configures the iSeries for attachments to a TCP/IP network.
1. At the iSeries command line, enter the following command:
ADDTCPIFC INTNETADR ('9.99.15.188') LIND(ETHLAN)
SUBNETMASK('255.255.255.0')
2. Your completed screen should look like Figure 30.
Figure 30. Example ADDTCPIFC Interface
System: ADDTCPIFC
Internet address:
Line description
Subnet mask:
Associated local interface *NONE
Type of service *NORMAL
Maximum transmission unit: *LIND
Autostart: *YES
PVC logical channel identifier
+ for more values
X.25 idle circuit timeout 60
X.25 maximum virtual circuits 64
X.25 DDN interface *NO
TRLAN bit sequencing *MSB