Mocomtech CDM-QX - Manual (Page 77)

CDM-Qx/QxL Multi-Channel Satellite Modem with DoubleTalk™ Carrier-in-Carrier® Revision 7
Front Panel Operation MN/CDMQX.IOM
5–11
possible. Press ENTER when done. Note that the asynchronous character format is FIXED
at 8-N-1: 8 data bits, 1 stop bit, no parity.)
5.4.1.3 CONFIG: Remote
Æ Ethernet
Ethernet Config: (◄ ►,ENT)
Gateway Address MAC SNMP
Select Gateway, Address, MAC, or SNMP using the ◄ ► arrow keys, then press
ENTER
.
CONFIG: Remote
Æ Ethernet Æ Gateway
M&C Ethernet IP Gateway:
192.128.001.001 (◄ ► ▲ ▼,ENT)
Edit the IP Gateway Address for the Ethernet M&C port for this unit by first selecting the digit
to be edited using the
ef arrow keys, then change the value of the digit to be edited by using
the dc arrow keys. Press ENTER when done.
CONFIG: Remote Æ Ethernet Æ Address
M&C Ether IP Address/Range:
192.168.001.001/24(◄ ►,▲ ▼,ENT)
Edit the IP Address and Range for the Ethernet M&C port for this unit by first selecting the
digit to be edited using the
ef arrow keys, then change the value of the digit to be edited by
using the dc arrow keys. Press ENTER when done.
CONFIG: Remote
Æ Ethernet Æ MAC
M&C Port MAC Address:
00-06-B0-00-00-D5
As shown in this example, this read-only window displays the factory program MAC address
for the Ethernet management interface.
CONFIG: Remote
Æ Ethernet Æ SNMP
SNMP: Communities Traps
(◄ ►,ENT)
Select Communities or Traps using the ◄ ► arrow keys, then press
ENTER
.
CONFIG: Remote Æ Ethernet Æ SNMP Æ Communities
SNMP Communities:
Read Write (◄ ►,ENT)
Select Read or Write using the ◄ ► arrow keys, then press
ENTER
.
CONFIG: Remote Æ Ethernet Æ SNMP Æ Communities Æ Read
Read Community: (◄ ► ▲ ▼,ENT)
public