Mocomtech CDM-QX - Manual (Page 245)

CDM-Qx/QxL Multi-Channel Satellite Modem with DoubleTalk™ Carrier-in-Carrier® Revision 7
Appendix C MN/CDMQX.IOM
C–27
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Software
Information N/A variable Query only.
Complete unit software information:
Example: FRW=
Boot:
FW/11246-1-,1.1.1,11/11/04
Bulk1:
FW/11245-,1.1.1,11/11/04
FW/11247-1-,1.1.1,11/11/04
FW/11248-1-,1.1.1,11/17/04
FW/11249-1-,1.1.1,09/27/04
FW/11250-1-,1.1.1,11/08/04
FW/11251-1-,1.1.1,11/16/04
FW/11252-1-,1.1.1,06/25/04
FW/11253-1-,1.1.1,10/21/04
FW/11254-1-,1.1.1,11/18/03
Bulk2:
FW/11245A,1.1.1,11/11/04
FW/11247-1A,1.1.1,11/11/04
FW/11248-1B,1.1.1,11/17/04
FW/11249-1B,1.1.1,09/27/04
FW/11250-1-,1.1.1,11/08/04
FW/11251-1-,1.1.1,11/16/04
FW/11252-1-,1.1.1,06/25/04
FW/11253-1-,1.1.1,10/21/04
FW/11254-1-,1.1.1,11/18/03
N/A FRW? FRW=x…x
(see Description of
Arguments)
Software
Image IMG= 1 byte, value of
1 or 2 Command or Query.
Current active software image in the form x, where:
1=Bulk Image #1 currently active
2=Bulk Image #2 currently active
IMG=
IMG?
IMG*
IMG#
IMG^ IMG? IMG=x
(see Description of
Arguments)
Temperature
of the Base
Unit N/A 3 bytes Query only.
Unit returns the value of the internal base unit temperature, in the
form of sxx (degrees C), where:
s=sign (+ or – character)
xx=value
Example: ITP=+26
N/A ITP? ITP=sxx
(see Description of
Arguments)
Number of
Unread
Stored Events N/A 3 bytes Query only.
Unit returns the number of stored Events, which remain Unread, in
the form of xxx.
Example: NUE=126
Note: This means unread over the remote control.
N/A NUE? NUE=xxx
(see Description of
Arguments)