Mocomtech CDM-QX - Manual (Page 252)

CDM-Qx/QxL Multi-Channel Satellite Modem with DoubleTalk™ Carrier-in-Carrier® Revision 7
Appendix C MN/CDMQX.IOM
C–34
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
BUC Comms
Enable
BCE= 1 byte, value of
0,1 Command or Query.
Enables or disables communications, via the FSK link, with an
externally connected BUC in the form x, where:
0=Disabled
1=Enabled
Example: BCE=0 (Disabled)
BCE=
BCE?
BCE*
BCE#
BCE^ BCE? BCE=x
(see Description of
Arguments)
BUC High
Current Limit
BCH= 4 bytes Command or Query.
BUC High Current Limit in the form xxxx, where:
xxxx is a value between 500 and 3200 mA.
Example: BCH=3100
BCH=
BCH?
BCH*
BCH#
BCH^ BCH? BCH=xxxx
(see Description of
Arguments)
BUC Low
Current Limit
BCL= 4 bytes Command or Query.
BUC Low Current Limit in the form xxxx, where:
xxxx is a value between 100 and 3000 mA
Example: BCL=0600
BCL=
BCL?
BCL*
BCL#
BCL^ BCL? BCL=xxxx
(see Description of
Arguments)
BUC Current
N/A 4 bytes Query only.
Indicates the value of the BUC Current, in the form: xxxx, where:
xxxx is between 0 and 9999, units MA.
If not available, response is 0000
Example: BDC=3100
N/A BDC? BDC=xxxx
(see Description of
Arguments)
BUC Voltage
N/A 4 bytes Query only.
Indicates the value of the BUC voltage, in the form xx.x,, where:
xx.x is a value between 0 and 64.0
If not available, response is 00.0
Example: BDV=43.6 (BUC DC voltage is 43.6 volts)
N/A BDV? BDV=xx.x
(see Description of
Arguments)
BUC 10 MHz
Reference
BFR= 1 byte, value of
0,1 Command or Query.
Enables or disables the 10 MHz frequency reference to the BUC in
the form x, where:
0=Disabled
1=Enabled
BFR=
BFR?
BFR*
BFR#
BFR^ BFR? BFR=x
(see Description of
Arguments)
BUC LO
Frequency
BLO= 6 bytes Command or Query.
BUC transmit LO frequency information in the form xxxxxs, where :
xxxxx is the LO frequency in the range of 3000 to 65000 MHz
All 0’s (000000) disables the feature
S is the sign for the mix (+ or – character)
Terminal Frequency= BUC LO TFQ
Example: BLO=12000+ (BUC LO is 12 GHz, low-side mix)
BLO=
BLO?
BLO*
BLO#
BLO^ BLO? BLO=xxxxxs
(see Description of
Arguments)