Mocomtech CDM-QX - Manual (Page 165)

CDM-Qx/QxL Multi-Channel Satellite Modem with DoubleTalk™ Carrier-in-Carrier® Revision 7
Ethernet Management MN/CDMQX.IOM
6–35
6.5.4.4.2 Config | LNB (Low Noise Block Down Converter) Page
Figure 6-19. ODU | LNB page
The ‘ODU | LNB’ page (Figure 6-19) is used to configure Low Noise Block Down Converter
parameters, and display the LNB status for L-Band operation.
LNB Control
• LNB DC Power and LNB 10MHZ may be turned ON or OFF using the drop-down
menus.
• The user may assign a LNB Current Threshold High limit value ranging from 50 to
600 mA.
• The user may assign a LNB Current Threshold Low limit value ranging from 10 to 400
mA.
• The user may assign the Rx Lockout Frequency and designate the value (using the drop-
down menu) as a HIGH (+) or LOW (-) limit.
Once the desired configuration settings have been made on this page, the user should then click
[Submit LNB Controls] as needed to save those changes.
LNB Status
The windows showing the LNB Current and LNB Voltage refresh automatically every five
seconds. They are read-only and cannot be changed.