Mocomtech CDM-QX - Manual (Page 106)

CDM-Qx/QxL Multi-Channel Satellite Modem with DoubleTalk™ Carrier-in-Carrier® Revision 7
Front Panel Operation MN/CDMQX.IOM
5–40
CONFIG: ODU Æ BUC Æ10MHz
BUC 10MHz Reference:
On Off
(◄ ►,ENT)
Select the BUC 10MHz frequency reference as either On or Off using the ◄ ► arrow
keys, then press
ENTER
.
CONFIG: ODU
Æ BUC Æ Alarm
BUC Current Alarm:
Upper Lower (◄ ►,ENT)
Select Upper or Lower using the ◄ ► arrow keys, then press
ENTER
.
CONFIG: ODU
Æ BUC Æ Alarm Æ Upper
BUC Current Alarm Upper:
Limit:1200mA (◄ ► ▲ ▼ ENT)
To edit the BUC Current Alarm Upper limit, first select the digit to be edited using
the ◄ ► arrow keys, then edit the value of that digit by using the ST arrow keys.
Press
ENTER
when done. The valid range of current (in mA) is from 500 to 4000.
CONFIG: ODU Æ BUC Æ Alarm Æ Lower
BUC Current Alarm Lower:
Limit:1200mA (◄ ► ▲ ▼ ENT)
To edit the BUC Current Alarm Lower limit, first select the digit to be edited using
the ◄ ► arrow keys, then edit the value of that digit by using the ST arrow keys.
Press
ENTER
when done. The valid range of current (in mA) is from 500 to 4000.
CONFIG: ODU
Æ BUC Æ Delay
BUC Power-On Delay:
001 seconds (◄ ► ▲ ▼ ENT)
To edit the BUC Power-On Delay value, first select the digit to be edited using the ◄ ►
arrow keys, then edit the value of that digit by using the ST arrow keys. Press
ENTER
when done. The valid delay range (in seconds) is from 0 to 999.
CONFIG: ODU
Æ BUC Æ LO
BUC LO Frequency:
12000 MHz (◄ ► ▲ ▼ ENT)
To edit the BUC Lockout Frequency value, first select the digit to be edited using the ◄
► arrow keys, then edit the value of that digit by using the ST arrow keys. Press
ENTER
when done. The valid delay range (in MHz) is from 0 to 35000.
Note: This value is used for displaying the RF frequency of the modem/BUC
combination. If the default value of 00000 is entered here, then no RF frequency will be
displayed on the CONFIG: Tx Æ Freq menu.