Mocomtech CDM-QX - Manual (Page 142)

CDM-Qx/QxL Multi-Channel Satellite Modem with DoubleTalk™ Carrier-in-Carrier® Revision 7
Ethernet Management MN/CDMQX.IOM
6–12
Note the following:
o These Name fields can be any alphanumeric combination with a maximum
length of 10 characters.
o These Password fields can be any alphanumeric combination with a
maximum length of 10 characters.
• SMTP Server: Specify the mail server IP address from where you want to send the
e-mail.
• SMTP Domain Name / Destination: The Administrator can assign the SMTP Domain
Name and Destination. This is required if the e-mail feature of the Support Page (Sect.
6.5.4.1.3) is to be used.
o For SMTP Domain Name, specify the domain of the e-mail server (usually
found to the right of the @ symbol in an e-mail address).
o For SMTP Domain Destination,specify the e-mail recipient name (usually
found to the left of the @ symbol in an e-mail address).
Host Access List
• IP (#) / Mask: The Host Access List allows a user to define which remote clients can
connect when the Access List is Enabled. Each entry allows a user to specify an IP
address and a subnet mask to define a unique class of machines that are allowed access.
For example, if a user wanted to grant access to a PC with an IP Address of 10.10.10.1
and any PC on a subnet of 192.168.10.xxx, then the Access List would be defined as :
IP 1 / Mask: 10.10.10.1/32
IP 2 / Mask: 192.168.10.0/24
For IP 3 / Mask and IP 4 / Mask, make sure they are not 0.0.0.0/0. An entry with
0.0.0.0/0 simply means any machine is allowed to access.
• Access List: The Access List allows a user to grant access via HTTP and SNMP to a
well-defined list of client machines.
Use the drop-down menu to select Enable or Disable. If Disabled, then any client
machine will be able to connect via HTTP and SNMP.
Once the desired configuration settings have been made on this page, the user should then click
[Submit Admin] to save these changes.