Mocomtech CDM-QX User Manual
Page 130
CDM-Qx/QxL Multi-Channel Satellite Modem with DoubleTalk™ Carrier-in-Carrier®
Revision 7
Front Panel Operation
MN/CDMQX.IOM
5–64
UTILITY: FAST
Æ Slot# Æ Mod, Demod Æ Config
FAST Configuration:
Edit Code Demo Mode
Select Edit Code or Demo Mode using the
◄ ►
arrow keys, then press
ENTER
.
UTILITY: FAST
Æ Slot# Æ Mod, Demod Æ Config Æ Edit
Code, Demo Mode
Operation here is identical to selections made via the
UTILITY: FAST
ÆBaseÆConfig
menu screen. Refer to
UTILITY: FAST
ÆBaseÆConfigÆEdit Code
or
UTILITY: FAST
ÆBaseÆConfigÆDemo Mode
for further details.
UTILITY: FAST
Æ Slot# Æ Mod, Demod Æ View
View Options: 01 (▲ ▼,ENT)
TPC Codec - Installed
Use the
▲ ▼
arrow keys to display which FAST options are either Installed or Not
Installed for Mod/Demod operation. Press
ENTER
when done.
UTILITY: FAST
Æ Slot# Æ Turbo
FAST: Config View
Board S/N: 423456789 (TPC#1)
As with the menu screen for
UTILITY: FAST
ÆBase
and
UTILITY: FAST
ÆMod, Demod
, this
menu screen identifies the serial number for the Turbo Product Codec board for the module
residing in this slot position (in the above example, Slot#1 has been selected, and the TPC board
is therefore identified as TPC#1).
Select Config or View using the
◄ ►
arrow keys, then press
ENTER
.
UTILITY: FAST
Æ Slot# Æ Turbo Æ Config
FAST Configuration:
Edit Code Demo Mode
Select Edit Code or Demo Mode using the
◄ ►
arrow keys, then press
ENTER
.
UTILITY: FAST
Æ Slot# Æ Turbo Æ Config Æ Edit Code, Demo Mode
Operation here is identical to selections made via the
UTILITY: FAST
ÆBaseÆConfig
submenu screens. Refer to
UTILITY: FAST
ÆBaseÆConfigÆEdit Code
or
UTILITY:
FAST
ÆBaseÆConfigÆDemo Mode
for further details.
UTILITY: FAST
Æ Slot# Æ Turbo Æ View
View Options: 03 (▲ ▼,ENT)
5M Turbo - Installed
Use the
▲ ▼
arrow keys to display which FAST options are either Installed or Not
Installed for Turbo Product Codec. Press
ENTER
when done.