Mocomtech CDM-QX - Manual (Page 124)

CDM-Qx/QxL Multi-Channel Satellite Modem with DoubleTalk™ Carrier-in-Carrier® Revision 7
Front Panel Operation MN/CDMQX.IOM
5–58
Load Config from Location 9
Empty (▲ ▼ ENT)
Locations 1 through 10 are available. Using the ST arrow keys, select the location from which
to load a configuration, then press ENTER. If the selected location contains valid data, the
following screen is displayed:
New Config has been Loaded
from Location 9 (ENT)
Press
ENTER
or
CLEAR
to return to the previous menu. If the selected location does not contain
valid data, the following screen is displayed:
Warning! Location 9
Contains No Data! (ENT)
Press
ENTER
or
CLEAR
to return to the previous menu.
5.9 (MAIN MENU:) Utility
UTILITY: RxBuffer Clock Ref
ID Display Firmware FAST
Select RxBuffer, Clock, Ref, ID, Display, Firmware or FAST using the ◄ ► arrow keys then
press
ENTER
.
5.9.1 UTILITY: RxBuffer
Press ENT to Re-Center
the Receive Buffer
Press
ENTER
to cause a forced re-centering of the Plesiochronous/Doppler Buffer.
5.9.2 UTILITY: Clock
Real-Time Clock:(◄ ►,▲ ▼,ENT)
Time=12:00:00 Date:24/04/03
IMPORTANT
To edit the Real-Time Clock time and date settings, first select the digit to be
edited using the W X arrow keys, then change the value of that digit using the
ST arrow keys. Press ENTER when done.
Note that, in accordance with international convention, the date is shown in
DAY-MONTH-YEAR
format.