Mocomtech CDM-QX - Manual (Page 207)

A-1
Appendix A. CABLE DRAWINGS
A.1 Introduction
The EIA-530 standard pinout provided on the CDM-Qx/QxL is becoming more popular in many applications. However, there
are still occasions, particularly with existing EIA-422/449 and V.35 users, when a conversion must be made.
For situations where such conversions are required, refer to the following table to select the appropriate cable.
In addition, the standard EIA-232 cable used for performing Flash Upgrading is depicted. This cable connects the
CDM-Qx/QxL Remote Control Port to the serial communications port of an external PC.
App. A FIG CEFD CABLE P/N DESCRIPTION
A-1 CA/WR0049
Modem Conversion Cable:
EIA-530
Æ RS-422/449 DCE Conversion (DB-25M ÆDB-25F, 40”)
A-2 CA/WR0059-2
Modem Conversion Cable:
EIA-530
Æ V.35 Winchester DCE Conversion (DB-25M Æ Winchester 34-pin Female, 8’)
A-3 CA/WR9718-1
Modem Conversion Cable:
CDM
Æ EIA-530 Conversion (DB-25M Æ DB-25F, 8’)
A-4 N/A
EIA-232 Switch Programming Cable (for Flash upgrading):
CDM-Qx/QxL Remote Port
Æ PC Serial Port (DB-9F Æ DB-9F)